Refer to label mounted on kickplate support for height clearance.Ī framed or overlay model, you will be installing panels to give the unit the custom Sub-Zero look. IMPORTANT NOTE: The kickplate must be removed for servicing. Leveled, make sure the drain pan is installed properly and install the kickplate. For installations with clearances of more than 1' (25), you must block the unit front and rear leveling legs, raise the unit until it makes contact with the wood block. You will extend the leveling legs when the unit is in its final position to reduce the possibility of the unit tipping forward. Retract the front leveling legs to allow you to move the unit more easily during installation. Follow the National Electrical Code and local codes and ordinances when installing Servicing only this appliance, is required.Īll Sub-Zero Built-In models are equipped with a power supply cord with a 3-prong grounding plug, which must be plugged into a mating 3-prong grounding-type wall receptacle. Model 685 Ice | Water Dispensing Width 42' (1067) Height 84 Model 611 Model 611G with Glass Door Model 650 Model 650G with Glass Door I LT- I N I N S TA L L A T I O N S P E C I F I C A T I O N S Models 601R and 601RG will not require the water line connection. I N S TA L L AT I O N S P E C I F I C AT I O N S Model 601RG All Refrigerator with Glass Door If you are installing Built-In units side by side, a separating filler strip is recommended. Make sure that the rough opening dimensions, door swing clearance, electrical service and plumbing are correct for the model you are about to install. Model is framed, overlay or stainless steel. By reading these instructions carefully, you will make the installation process easier, problem-free and, most importantly, safe.Īny questions or problems about the installation should be directed to your Sub-Zero dealer or the Sub-Zero Customer Service Department at SUB-ZERO® is a registered trademark of Sub-Zero Freezer Company, Inc.Īs you follow these instructions, you willĭuring the installation. Check our website,, for the most up-to-date specifications. Specifications are subject to change without notice. Sub-Zero 650 | Built-In Installation Guide.

Sub zero fridge panel installation